150Watt occupancy sensor led high bay, dimmable with 1-10v,daylight sensor,dali dimming,
occupancy sensor light high bay,Microwave Sensor LED High Bay Light, Dali Driver
LED High Bay Light with microwave sensor is designed to replace HID high bay series.
ZLONE Microwave sensor LED High Bay Light powered by Samsung 5630 & Osram LED Chips.
LED High bay Tubes with microwave sensor is more convenient with automatically on and off function.
These Linear tubes offer a long lifetime and excellent maintenance to minimize the maintenance costs.
FEATURES
● 5 years warranty
● High CRI of Ra 82-85
● IP65 water-proof, dust-proof, moisture-proof, vapor-proof, weak corrosion proof.
● Microwave sensor function. Lights would be on automatically when people come by and be off when people leave.
● Sensor Distance:8-10meters,external motion sensor
● High luminous efficiency with EPISTAR 2836,Samsung 5630 or / Osram Chips.
● Meanwell HLG driver, TUV UL CE certificate, PF>0.9, THD<12
● CE RoHS TUV SAA approval.
BENEFITS
● Adopt Microwave sensor, the LED High BayTube can be applied in a wider use.
● Up to 80% energy saving compared to HID high bay.
● Lower maintenance cost thanks to over 3 times longer lifetime.
ZL-HBL-1200-150W =4ft 150Watt datasheet
| Total wattage | 150Watt |
| Input voltage | AC100~277V / 50~60Hz |
| Output voltage | 37 V |
| Driver Brand | Meanwell HLG/ ELG optional |
| Output current | 2 A |
| Power factor | >0.95 |
| Total harmonic distortion | <12 |
| Photometrical data |
| Color temperature | 2700~6000K |
| Led chip | High Power EPISTAR SMD 2835 |
| Led Quality | 924pcs |
| Color rendering index Ra | >80Ra |
| Nominal luminous flux | 18,000 - 19,500lm |
| Average lamp efficiency | 120-130lm/W |
| Starting time | <0.5 s |
| Rated beam angle(half peak value) | 120º(50%) |
| Temperatures & operating conditions & installation |
| Ambient temperature range | -40~+50ºC |
| Temperature range in operation | -40~+50ºC |
| Installation | Suspended or Ceiling-mounted |
| Lifespan |
| Nominal lamp lift time | 50000 h |
| Rated lamp lift time | 50000 h |
| lumen main fact at of nom. lift time | 0.80 |
| Dimensions & weight |
| Size | 1200*150*68 mm |
| Product net weight | 6.0kg |
| Capabilities / Optional | Dimmable & Emergency & Motion sensor |
| Sensor Distance | 8-10Meters |
| Certificates |
| Type of protection | IP65 , IK10 impact resistance |
| Standards | TUV,CE and SAA |
| Packing |
| Qty/Ctn | 2 pcs |
| Carton Size | 1270x240x260mm |
| CBM/Ctn | 0.06777m3 |
| Carton Gross Weight | 15kg |
DIMMING FUNCTION
● Detection area, time delay and daylight threshold can be precisely set via DIP switch.
● Automatic switch on/ off and dimming when used in combination with 0-10V dimming,
1-10V dimmable LED drivers or ballasts
● Built-in adjustable daylight sensor.
● Wide detection area, range up to 16m in diameter.
2-step dimming function― 100%--->low light (Never turn off).
It makes our lighting products particularly suitable for use in corridors, stairwells and
underground passages where low light levels are maintained until motion is detected.:
Tips:
① No motion detected, the lamp remains at a low light level all the time.
② When motion is detected, the sensor brightens the lamp to 100% illumination.
③ After the hold time, the sensor dims the lamp at the preset low light level if no motion is detected.
3-step dimming function― when used in combination with 0-10V dimmable &
1-10V dimmable LED drivers and ballasts,
the sensors can achieve, 100%--->low light--->off.:
Tips:
① With sufficient ambient light, the sensor does not switch on the lamp.
② With insufficient ambient light, the sensor switches on the lamp when motion is detected.
③ After hold time, the sensor dims the lamp at a low light level if no new motion trigger.
④ After stand-by-period, the sensor switches off the lamp if no motion is detected in its detection zone.
Installation way: Surface Mount, suspension, wall mount
More sizes and wattages avaialble:
| Electric Data |
| Model | ZL-HBL-600-80W | ZL-HBL-900-120W | ZL-HBL-1200-150W | ZL-HBL-1500-200W |
| Power | 80W | 120W | 150W | 200W |
| Input Voltage | AC 90-277V 50/60Hz |
| Photometric Specifications |
| LED Brand | EPISTAR 2835 ( 3030 / Samsung 5630 optional ) |
| Driver Brand | Meanwell Driver HLG/ELG |
| CRI | >80 |
| CCT | 2700-6500K |
| PF | >0.95 |
| Beam Angle | 120° |
| Luminous Efficiency | 120-130lm/w |
| Luminous Flux | 9,600 -10,400lm | 14,400 -15,600lm | 18,000 - 19,500lm | 24,000 -26,000lm |
| LEDs Qty. | 504pcs | 756pcs | 924pcs | 1260pcs |
| Mechanical Specifications |
| IP Rate | IP65,IP66 |
| Working Environment | -40℃~50℃,20%~90% H.R |
| Storage Temperature | -40℃~85℃,10%~90% H.R. |
| Body Material | Aircraft Aluminum + AL PCB |
| Lens Material | PC |
| Dimmable/Control Way | 0-10V, 1-10V dimmable,TRIAC dimmable, Daylight Sensor/ Microwave motion sensor/Zigbee |
| Sensor Distance | 8-10m |
| N.W. | 3.5KG | 4.5KG | 6.0KG | 7.0KG |
| Lamp Size | 600x150x68mm | 900x150x68 mm | 1200x150x68 mm | 1500x150x68 mm |
| Lifespan | >50,000 Hours (Ta=30℃@L70) |
| Warranty | 5-Year |
Production pictures
Packing and delivery
Application:
Widely used in Airport, Auto Dealership, Education, Healthcare, Distribution, Gymnasiums,
Industrial & Warehouse, Recreation & Public Venues.
Key words:
Dali dimmable 150W high bay
led dali dimmable high bay light
external motion sensor led high bay
150w led high bay with occupancy sensor
led occupancy sensor high bay
led occupancy sensor light
led occupancy sensor high bay light
150w led occupancy sensor light
microwave sensor led light
zigbee dimmable led high bay 150watt
led zigbee dimming high bay
1-10v dimming high bay lighting led
0-10V dimmable lighting fixture
warehouse lighting high bay
pir sensor dimmable high bay
PIR Sensor high bay led
led pir sensor light
PIR Sensor high bay light
pir sensor 150watt
LED Pir sensor light
pir sensor lighting
pir sensor light led
Product Tags:
|
|
2700-6500K Linear Pendant Light Fixtures 150 Watt Occupancy Sensor 5 Years Warranty Images
|
